Description

Yaesu FT-7 Transceiver Extender Board Pair Riser in KIT FORM Offering a circuit extender board two board set in KIT FORM** for the Yaesu FT-7 Transceiver. These board are used to extend the plug-in boards so they can be serviced and/or repaired. This board is close in fit, form and function to an original Yaesu extender board. When used with this extender the transceiver board will be up out of the radio board slot and be ready for voltage and or o-scope signal probing. It has been reported that these extenders will also work with the Yaesu FT-7B with one exception. Neither extender will work with the AM Mod unit PB-1874. I can provide an extender for the AM MOD UNIT but would need to see a photo of the board and perhaps other information. Please write if you need an AM MOD UNIT extender and can send the needed information. Everything required to make the four extenders shown in the photo are provided except the solder needed to solder the edge connectors to the boards and epoxy to support the unused connections on the blank side of these boards. The offering includes the following board: One 14 X 1 (14 conductors) One 16 X 1 (16 conductors)